EcoElectric Slider

ESL6TV Ball screw driven

ESL6TV Ball screw drivenicon

ALL DC24V icon

Electric slider driven by 24VDC only without the need for dedicated driver. (Ball screw driven, supporting 721 to 920 mm stroke.)

No-frills unit with no cumbersome setting or adjustment by focusing on functions required for the production line.

[Relevant Product]
ESL30 series: for 200 to 900 mm stroke.
ESLV series: belt driven type, for 220 to 2,020 mm stroke.

[ESL6TV060] Main body
Stroke	721 mm to 920 mm
Product weight for each stroke (approx.)	[Stroke]: [Product weight] 420 mm: 5.9 kg 520 mm: 6.6 kg 620 mm: 7.3 kg 720 mm: 8.0 kg 820 mm: 8.7 kg 920 mm: 9.4 kg
Size of body	W: 80mm L: stroke + 407.8 mm H: 66 mm
Thrust	60 N
Lateral weight capacity (reference)	37.5 kg
Speed rating (reference)	250 mm/sec

[ESL6TV120] Main body
Stroke	721 mm to 920 mm
Product weight for each stroke (approx.)	[Stroke]: [Product weight] 420 mm: 6.2 kg 520 mm: 6.9 kg 620 mm: 7.6 kg 720 mm: 8.3 kg 820 mm: 9.0 kg 920 mm: 9.7 kg
Size of body	W: 80 mm L: stroke + 456.8 mm H: 66 mm
Thrust	120 N
Lateral weight capacity (reference)	45 kg
Speed rating (reference)	250 mm/sec

[ESL6TV060] Power source
Model	Motor module: [EDM20] (HIRATA BLUE MOTOR is built in.)
Voltage rating	24VDC ± 10%
Output rating	20 W
Standby power	0 W
Current rating	1.2 A (rms)
Max current	2.6 A (rms)(typ.)
Instantaneous maximum current	4.0 A (peak)
Dedicated controller	Not required
Connector spec	M12 connector (male) 4 pins: (1) - (2) 24 V [CCW (BWD)] (3) 0 V (4) 24 V [CW (FWD)]

[ESL6TV120] Power source
Model	Motor module: [EDM50] (HIRATA BLUE MOTOR is built in.)
Voltage rating	24VDC ± 10%
Output rating	50 W
Standby power	0 W
Current rating	2.2 A (rms)
Max current	6.0 A (rms)(typ.)
Instantaneous maximum current	8.0 A (peak)
Dedicated controller	Not required
Connector spec	M12 connector (male) 4 pins: (1) - (2) 24 V [CCW (BWD)] (3) 0 V (4) 24 V [CW (FWD)]

Safety Precautions

Please perform risk assessment before use to determine the guarding requirement as it depends on specs and environment of the end user.

Two-speed control

[Horizontal application]
By installing a sensor, the unit can be controlled to decelerate in the middle of motion and stop gently.
Two-speed control

[Vertical application (moving down)]
When lowering with a heavy load, apply the control mode for lowering.
Speed channel [CH]

Operation speed can be changed by adjusting the speed channel on the motor module (nine levels between CH1 and CH9).
Manual lock release

Manual lock can be easily released by loosening the lock release bolt, shifting the slider, and re-tightening the bolt.