EcoElectric Turn Unit

ETR180

ETR180icon

ALL DC24V icon

Turntable type actuator using EcoElectric Cylinder (180° turn).

By mounting EcoElectric DC Conveyor on EcoElectric Turn Unit, workpiece can flow in a different direction.

[Relevant Product]
ETR90: for 90° turn.

Main body
Size of main body	W: 799.4 mm L: 524 mm H: 112 mm
Product weight	82 kg
Allowable payload (*1)	600 kg
Allowable moment (*1)	55.2 kgm
Crossed roller bearing rated load	C 50900 N (Dynamic load rating) Co 72200 N (Static load rating)
Allowable load inertia	41 kgm²
Stopping accuracy	90° ± 0.1°
Angular velocity (※2)	0.393 rad/sec
90° rotation time (※2)	4 sec

(*1) The actual allowable payload and allowable moment need to be determined according to the operating conditions such as the shape of the components attached to the product and the offset position.
(*2) The angular velocity and rotation time are obtained when the speed adjustment channel is set to 5.

Power source
Model	ECY40-150 (EcoElectric Cylinder) * w/o brake
Voltage rating	24VDC ± 10 %
Output rating	20 W
Standby power	0 W
Current rating	1.2 A (rms)
Maximum current	2.6 A (rms)(typ.)
Instantaneous maximum current	4.0 A (peak)
Thrust rating	400 N
Stroke	150 mm
Dedicated controller	Not required
Connector spec. (EcoElectric Cylinder A)	M12 connector (male) 4 pins: (1) - (2) 24 V [-90° -> 0°] (3) 0 V (4) 24 V [0° -> -90°]
Connector spec. (EcoElectric Cylinder B)	M12 connector (male) 4 pins: (1) - (2) 24 V [0° -> 90°] (3) 0 V (4) 24 V [90° -> 0°]

Safety Precautions

Please perform risk assessment before use to determine the guarding requirement as it depends on specs and environment of the end user.

Components

Two-speed control

By installing a sensor, the unit can be controlled to decelerate in the middle of rotation and stop gently.
*Above figure shows an example of -90° turn.
Speed channel [CH]

Operation speed can be changed by adjusting the speed channel on EcoElectric cylinder (six levels available between CH1 and CH6: do not use CH7 or higher).