• [ECY]EcoElectric Cylinderthumbnail_0

  • [ECY]EcoElectric Cylinderthumbnail_1

  • [ECY]EcoElectric Cylinderthumbnail_2

[ECY]EcoElectric Cylindermain_0
[ECY]EcoElectric Cylindermain_1
[ECY]EcoElectric Cylindermain_2

EcoElectric Cylinder

ECY

ECYicon

ALL DC24V icon

Rod type ball screw actuator driven by 24VDC only without the need for dedicated driver. Used just like a pneumatic cylinder.


Easy operation: stops at both ends when it hits something.


As the stop position is maintained by the built-in brake, the cylinder can be operated in a vertical direction.

Specs.

[ECY40] Main unit
Nominal stroke 50 mm / 100 mm / 150 mm / 200 mm
Product weight 2.8 kg / 3.0 kg / 3.2 kg / 3.4 kg
Motion type Automatic stop at both ends and a rod stops when it hits something.
Rated thrust 400 N
Speed 6 mm/sec to 140 mm/sec
* Varies depending on load and/or mounted posture of product.
Dedicated controller Not required
Brake holding force 1200 N

[ECY20 (built-to-order product)] Main unit
Nominal stroke 50 mm / 100 mm / 150 mm / 200 mm
Product weight 2.8 kg / 3.0 kg / 3.2 kg / 3.4 kg
Motion type Automatic stop at both ends and rod stops when it hits something.
Rated thrust 200 N
Speed 12 mm/sec to 280 mm/sec
* Varies depending on load and/or mounted posture of product.
Dedicated controller Not required
Brake holding force 600 N

[ECY40 / ECY20 (Built-to-Order)] Power source spec.
Type Motor module: EDM20
(HIRATA BLUE MOTOR is built in.)
Voltage rating 24VDC ± 10 %
Current rating 1.2 A (rms)
Max. current 2.6 A (rms)(typ.)
Instantaneous maximum current 4.0 A (peak)
Standby power 0 W
Connector spec M12 connector (male)
4 pins:
(1) -
(2) 24 V (retract)
(3) 0 V
(4) 24 V (extend)

Safety Precautions

Please perform risk assessment before use to determine the guarding requirement as it depends on specs and environment of the end user.

Configuration

  • Body

    Bodyの画像

  • Motor module

    Motor moduleの画像

Feature

  • Speed channel

    Speed channelの画像

    Operation speed can be changed by adjusting the rotary switch on the body using a screwdriver (nine levels).
    Multiple cylinders can be easily set at the same speed.

  • Manual lock release

    Manual lock releaseの画像

    Manual lock can be easily released by loosening the lock release bolt, shifting the slider, and re-tightening the bolt.

Inquiry

Check this out to inquire later.

    Make an inquiry now for the checked product(s).

    Contact

    For more information, please contact us.

    Contact

    Scroll
    0% 10% 20% 30% 40% 50% 60% 70% 80% 90% 100%